Sir OTW, I'm having doubt if my alfa card can inject packets. But when i try to attack a client-less WEP encrypted AP by using macchanger, It generates thousands of packets but not able to send it.
I tried it again another day but still the same. I've just created an account just to say a big thanks for your tutorials. I got a problem and i need your help. Can someone help me? What should i do? This is a common problem. Check out this link for a. I was working on my i5 desktop computer with Kali booted from USB stick. I had no client connected to wifi so I used deauth type of attack but data was rising very slow after 20 mins I had maybe Am I doing something wrong?
Do I need to install driver and not to use generic one which adapter automatically obtains when connected to the host? Sir OTW, I have been injecting packets for 11hours now but to no avail.
I have captured IVs but still can't crack the password. Should I keep goin? Why is it taking so long?? You need about No it shouldn't take this long in most cases.
More like 50 second-ish maybe 20 mins. You may have a weak signal. But if you're getting IVs just wait for it. Sir OTW, i'm really impressed by your tutorials so far and now I wanted to try on my own so i made a live usb for kali and tried to crack my own router's wifi wpa.
But i ran into a problem that is after this command airodump-ng --bssid my router's mac -c my router's channel -w WEPcrack mon0 , I see no clients connected to it however my phone and other phones are connected to this wifi. Can you tell me where am i going wrong. Also I am using an atheros wifi usb as wireless adaptor and monitor mode is enabled on it. I'll be glad if you could help as you are my only source :. See I can't find any clients station even though my phones are connected to this router.
What channel is the AP on? I am guessing channel 1? The if is on ch 8 for some reason. The router is on channel 1. The fixes channel mon0: is not on 8. It is changing randomly like 1,6,8,11 likewise. It's just I commented in the wrong section by mistake. So i tried what you told but still no luck!! I still can't see any clients. Any more solutions? Thanks for the help.
Can you provide a screenshot please? Image Link. Can i hack this k. Reply me quick I know that means my MAC address is wrong for mon I just saw that Kali released an update to 1. I have no clue to what you refer except the recent Distro update to 1.
Good Luck and read the comments section or search WHT for the fix next. Please anyone can help me. I want to hack my neighbor wifi password. Because I ask them nicely to give me the password. Simply download Kali Linux at www. I try to download kali Linus it's about 3. And it's asking for boot. So brother my laptop is acer laptop. Windows 7. Hi, love your tutorials, but I was trying this today and was doing fine till step 5.
Regarding the aireplay-ng command I have a some questions. And also, is there a way of getting IVs faster? What am I doing wrong? Welcome back, my rookie hackers! Subscribe Now. Top 5 things to do about your tech before you die. If you're not using a kanban board, you're not as productive as you could be. Show Comments. Hide Comments.
My Profile Log out. The best way to do this is to use a wireless network adapter that's capable of packet injection. This means our adapter will be able to send forged packets to our target network, allowing us to replay anything that would cause the router to provide the amount of traffic we need. We have a list of the best compatible network adapters available for Kali in the article linked below if you need some help selecting one.
You'll also need a fully updated version of Kali Linux, which you can run as a virtual machine or directly on something like a Raspberry Pi. To start attacking a WEP network, you'll need to find one first. To do so, you'll run a series of filters with Airodump-ng to help you locate only vulnerable networks nearby. Airodump-ng is included in the Aircrack-ng package, so be sure to install it with apt-get install aircrack-ng if you don't already.
To get started, type ifconfig to find the name of your wireless network adapter, which you should have plugged in already. In Kali Linux, it should be something like wlan0. Next, you'll need to put your attack card into monitor mode. In a terminal window, type sudo airmon-ng start wlan0.
This will put your card into monitor mode, likely changing the name of the card as well. Take note of this new name by running ifconfig or ip a again, as you'll need it for the next step. The complete command can be seen below. This will scan the area for any packets using WEP encryption, returning the name and information of the network if one exists. Once you have the information, you'll need to use it as a filter to tailor your attack in the next step.
Once you have the information you need for targeting the WEP network from Airodump-ng, there are a few variables you'll need to remember. The next tool you're going to use is a little aggressive, to say the least. Besside-ng will attack all Wi-Fi networks nearby if you don't give it the proper attack parameters to prevent this behavior.
The actual attack, however, is highly automated and should proceed until the attack is successful in recovering the WEP network key for as long as you are in the range of the network.
It has IVs. I am wondering: Can I get a clue from the captured file to speed the process of brute-forcing? If not, what other ways I can try to decrypt the packet? Improve this question. Anders If you just want to decrypt the packet, you can try Chopchop, which decrypts a single packet, using CRC Azteca I would want to find the password. Is there any luck to find the password using Chopchop?
Add a comment. Active Oldest Votes. You don't have enough IVs Plain and simple. What does that mean? How can I successfully crack the key? Improve this answer. Community Bot 1. Dear MechMK1, thank you so much for your thorough answer. Unfortunately, I do not have access to the wifi transmitter. All I have is the. So, I guess I should go for brute-forcing and wait even more :D.
0コメント